Qmobile i6 Metal One V2 SPD Firmware Flash File 100% Tested Download for your device. This is an amazing tool that you can everything work this solution to use like as remove pin lock, pattern lock removes, Pin lock remove, IMEI problem, hang on log etc. It is simple software. Using this software we can easily do the work. This tool is a totally free download that can be easily used. We have provided the latest version of this link on our web page, anyone can download it from.
Qmobile i6 Metal One V2 Firmware Flash File Link
Qmobile_i6_Metal_One_V2_Firmware_Download
User Password: qmobile84
I6_METAL_ONE_i6_Metal_ONE_new_6.0_MRA58K_release-keys_QMobile_i6_Metal_ONE
SPD_ANDROID_USB_DRIVER_DOWNLOAD
How To Flash SPreadtrum (SPD) Pac File With Upgrade Tool.
Spreadtrum(SPD) .pac file Flashing Manual Guideline
Step 1: Download the Spreadtrum USB Driver on the Laptop/Computer. Then Install it. If the driver is already installed on the PC then avoid this process.
Step 2: Download the desire Stock ROM (.pac) to the PC.
Step 3: Download the Spreadtrum Upgrade Tool and extract on the computer.
Step 4: Switch off the mobile phone.
Step 4: Open the UpgradeDownload.exe file.
Step 5: When the Spreadtrum UpgradeTool is Open, Connect the Android phone to the PC. Make sure that the mobile device is switched off.
Step 6: When the Android phone connected to the computer. Select the Button and add the .pac file (Stock ROM which shows as .pac).
Step 7: When you have added the.Pac flash file in Spreadtrum Upgrade Tool. Select the ‘’Start Downloading ‘’ button to begin the flash process.
Step 8: Completing the flash process. You will be able to see the Green Passed Note in Spreadtrum Upgrade Tool.
Now flashed the smart phone using the Spreadtrum Upgrade Tool.
Caution:
– Don’t stop this process as it bricks the device. Make sure no power separation takes place.
-If Spreadtrum Flash Tools is not noticed or detect the phone, then install SPD USB driver. Then Reconnect you switched off the phone with the computer.
-If the phone is not recognized again. Then try the Meta mode flashing process.
Step 1: Download the Spreadtrum USB Driver on the Laptop/Computer. Then Install it. If the driver is already installed on the PC then avoid this process.
Read me:
• Take a back of everything if you are going to flash the above firmware on the smart phone device. Because it’s a chance to delete the personal data after flashing the stock firmware.
• To check the new firmware, you can go to the ‘’ settings -> About Phone ->Check Firmware’’. You can find the new destination of the firmware.
How to Hang On Logo Solved
Step 1: Make sure that the tablet is actually powered off.
Step 2: Now Press the power and the volume up buttons together until you see the startup logo on the screen.
Step 3: You can see the logo, release the buttons and allow the device to enter the system recovery mode.
Step 4: Next use Volume down button and to get the “factory reset” option when in recovery mode the “volume up” and “volume down” button.
Step 5: After you have selected the “factory reset” press the power button to select that option.
Step 6: And now press the power button to hard reset the phone.
How to White Screen & Black Screen Solved Flash File:
#At first download this software file.
#Then extract rar file.
#Now open the SP flash tool.
#After insert scatter file loading and top download.
#Plug in a USB cable.
#Wait all done work process.
#Unplug the USB cable.
#Now reboot your phone.
#Black or green screen is now fixed.